User guide

5-5
Manual Creation of a DCP
5.2 Creating JPEG2000 D-Cinema Data Manually
This section describes how to create JPEG2000 compressed data opti-
mized for the digital cinema either from a DSM or DCDM. For further
information about this delivery type see section “JPEG2000” on
page 2-3:
 Prepare your source data (either a DSM or a DCDM) appropriately
as described in section “Preparing the Source Data” on page 2-7.
 Afterwards call up the finalize dialog of the DVS software (menu
Project » Finalize…).
 Choose a name and storage location for the finalized files according
to your project’s needs. To set the file name(s) you can also use a
variable naming with the button NAME OPTIONS….
Figure 5-5: File name and storage location
 As the file format select the JP2 file format with the file type
12 bit XYZ.
 Configure the JPEG2000 encoding options as described in section
“JPEG2000 Options” on page 6-9.
 Make sure that the hardware finalize support is activated.
Figure 5-6: File format settings
 In case your source data provides 3D material or subtitles use the
Stereoscopic output and the Subtitle output settings items and
configure them accordingly.
 Use the settings items in the middle of the finalize dialog to specify
the video format. Adjust them so that they match the format of the
For details about 3D and the Stereoscopic output item re-
fer to section “Stereoscopic DCP” on page 6-2 as well as
the “CLIPSTER 3D/Stereoscopy” supplement user guide.
Further information about the Subtitle output items can be
found in section “Delivery Format” on page 3-13.