User guide

4-6
Using the DCP and Self KDM
4.4 Creating the Extra Files Again (CPL only)
When an already generated DCP is loaded in the Edit Tool (see section
“Loading the DCP” on page 4-3), you can create the extra files (e.g.
CPL, KDMs and PKL) of the DCP again, for example, to correct typos
in the extra files or other delivery issues. This way you do not have to
generate the DCP again completely. To create only the extra files the
digital cinema delivery tool provides the option CPL only (see section
“Delivery Type” on page 3-5). It will lead you straight to the configu-
ration steps where you can set up their creation (see from section
“CPL” on page 3-16 onwards).
After finishing the configuration of the extra files they can be saved at
any location you want in the configuration step for the delivery creation
(see section “Delivery Creation” on page 4-10). When saving in the di-
rectory of the loaded DCP, all already existing extra files (including all
KDMs) will be deleted and the new ones will be saved in their stead.
4.5 Creating Additional KDMs (KDM only)
Once an already generated DCP is loaded in the Edit Tool (see section
“Loading the DCP” on page 4-3), it can be used to create further
KDMs, for example, for later releases. This way you do not have to gen-
erate the DCP again completely. To create additional KDMs the digital
cinema delivery tool provides the option KDM only (see section “De-
livery Type” on page 3-5). It will lead you straight to the configuration
step where you can set up their creation (see section “KDM” on
page 3-18).
After finishing the configuration of the KDMs to be created they can be
saved at any location you want in the configuration step for the delivery
creation (see section “Delivery Creation” on page 4-10).
Whether the configuration step for KDMs is required depends
on whether an encrypted or unencrypted DCP has been load-
ed.
This way you can create additional KDMs (see section “Creat-
ing Additional KDMs (KDM only)” on page 4-6) as well.