User guide

3-14
Digital Cinema Delivery Tool
Additionally, specify the audio format for the digital cinema content ac-
cording to your needs, for example, select the WAV (DCDM or
JPEG2000) or MXF (DCP) file format in 24 bits as a multi-channel file.
In case the digital cinema content should provide subtitles, the check
box Subtitle output must be activated. With the button SUBTITLING…
to the right you can specify the output of the subtitles further. It opens
the following window:
Figure 3-13: The options for subtitles
In the window ’Subtitling options’ you can determine whether or not
to create subtitle files with the check box at the top. If activated, you
can select the subtitle tracks that a file should be created for (see also
section “Adding Further Subtitles (via Subtitle Tracks)” on page 2-12)
with the additional check boxes in the list box. The file format of the
subtitle files to be created should be set with regard to the standard of
the final DCP (see section “DCP Standards” on page 2-6):
Audio retiming should be activated when the output frame
rate differs from the one selected for the timeline.
These settings items are almost identical to the ones used in the
finalize dialog. For further information about them see the
“CLIPSTER Edit Tool” user guide.
For details about the Stereoscopic output item refer to sec-
tion “Creating a 3D DCP” on page 6-3.
SMPTE Phase 0/SMPTE Phase 1 XML (*.xml)
SMPTE Phase 2 MXF (*.mxf)