User guide

3-12
Digital Cinema Delivery Tool
Depending on the selected color space the options (radio buttons) in
the middle of the settings area will be displayed. With them you have
to specify how to interpret the color space of the source material in the
timeline, i.e. the color profile/type of the selected color space:
When everything is set up correctly, you can go to the next configura-
tion step with the button NEXT.
Table 3-1: Settings for color space ’RGB’
RGB REC 709 Activate this radio button if your material is
stored in the REC 709 color profile.
You can adjust the gamma (luminance) of the
output with the items to the right: When
switching the combo box to the right from
SMPTE gamma (the default gamma as speci-
fied by SMPTE which cannot be adjusted) to
another setting, the slider will be made avail-
able. Then the gamma value can be changed
via the slider or the entry field to the right.
RGB DLP P3 Activate this radio button if your material is
stored in the DLP P3 color profile.
With the slider and the entry field to the right
you can adjust the gamma (luminance) of the
output.
RGB DLP P7 Activate this radio button if your material is
stored in the DLP P7 color profile.
With the slider and the entry field to the right
you can adjust the gamma (luminance) of the
output.
RGB with applied
3D LUT…
This setting will be available when a user-de-
fined 3D LUT has been applied to the timeline.
When activated, this 3D LUT will be used for
the color conversion.
Table 3-2: Settings for color space ’XYZ’
XYZ native Activate this radio button if your material is
stored in the X’Y’Z’ color space already. Then
no color conversion will be performed.
YCxCz If you material was processed with a YUV ma-
trix, this setting has to be activated. The bin clip
properties of these clips in the timeline have to
be set to YUV with the appropriate YUV matrix
selected that was used to process the material
(see also section “The Steps to Prepare a
DCDM” on page 2-7).