User guide

3-8
Digital Cinema Delivery Tool
’KDM only’
This option allows you to create additional KDMs without generating
the DCP again completely (e.g. for later releases of the same encrypted
DCP). It will be available when an encrypted DCP has been loaded into
CLIPSTER (see section “Creating Additional KDMs (KDM only)” on
page 4-6). For this the following configuration steps are necessary:
Figure 3-8: Configuration steps for a KDM only
’Supplemental DCP’
This option allows you to create additional material for an already gen-
erated DCP (master DCP), if feasible without generating the DCP again
completely (e.g. for localizations of a feature film). It will be available
when a DCP (encrypted or unencrypted) has been loaded into CLIP-
STER (see section “Modifying a DCP (Supplemental DCP)” on
page 4-7). For this the following configuration steps are necessary:
Figure 3-9: Configuration steps for a supplemental DCP
Whether the configuration step for KDMs is required depends
on whether an encrypted or unencrypted DCP has been load-
ed.
An unencrypted DCP can be encrypted later either with the op-
tion Master DCP with KDM or via a finalizing (see section
“Modifying a DCP Manually” on page 5-14).