User guide

3-4
Digital Cinema Delivery Tool
The configurations that can be made for the currently displayed config-
uration step are shown in the settings pane in the middle of the win-
dow. When you are finished with the configurations for the current
step, you can go to the next or previous configuration step with the ap-
propriate buttons in the button area at the bottom of the window.
The buttons of the button area allow you to control the digital cinema
delivery tool:
Saves the already specified configuration settings
of the digital cinema delivery tool to a file.
Loads previously saved configuration settings from
a file.
Steps to the previous configuration step for the
currently selected delivery type.
Steps to the next configuration step for the cur-
rently selected delivery type. When the last step is
reached, it will be labelled ’Create’, which will then
start the creation of the digital cinema content.
Closes the digital cinema delivery tool without cre-
ating digital cinema content. However, already
specified configurations will not be lost but stored
during run-time.
Already made configuration settings are saved in a project file
as well.