User guide

3-10
CLIPSTER Edit Tool User Guide
Figure 3-6: Project in timeline
As a next step we want to delete one of the clips from the timeline and
change the sequence of the remaining clips.
3.2.4 Moving Clips in the Timeline
Because for this tutorial we want to have only two clips in the video
track, clip B and clip A (in this particular order), we have to delete the
second part of clip A and then change the sequence of the remaining
two clips. For this perform the steps as described below:
y Select the second part of clip A (the last clip present in the timeline)
with a click of the mouse and delete it with the keyboard key [Del].
The representation of the clip in the timeline will be deleted and you will
see two remaining clips in the video track of the timeline:
The buttons right in front of the timeline tracks (video as well
as audio) determine whether a track is muted (barred from an
output, button M) or locked (barred from editing, button L).
With the button SETTINGS… at the top left side of the timeline
area you can determine the output format (video raster) of the
project. Here you can also configure the size of the video
and/or audio tracks. There is also a setting available that per-
forms an autoscaling of the material in the timeline if the reso-
lution differs from the configured output raster.