User guide

A-1

Appendix

This chapter provides further information about the Edit Tool.

A.1 Glossary of Terms

Here you can find several terms and their meaning as they are used in

this documentation:

1D LUT A look-up table (LUT, see below) that provides

for one input value a set of output values (usu-

ally RGB).

3D LUT A look-up table (LUT, see below) that provides

for three input values (RGB) a set of output val-

ues (RGB).

9-pin protocol

(RS-422)

Protocol for serial data communication. The

RS-422 9-pin protocol is widely used for a com-

munication between a range of equipment,

such as VTRs, digital disk recorders, mixers, edit

controllers, etc. See also RS-422 and Odetics

protocol. DVS supports this protocol in master

and slave mode.

A-mode Sorting of material according to a final edited

timeline (non-linear editing). With this an EDL

would be sorted by destination in- and out-

points, for example. See also C-mode.

audio clip A file of the Windows file system that contains

audio data.

autoconforming The initial and automatic conforming of an EDL

or cut list. See conforming.

bin Library and clip management tool of the DVS

software.