User guide

9-26
CLIPSTER Edit Tool User Guide
selection of this menu option opens the standard dialog window for a
file selection.
To load previously saved default configuration settings select in the di-
alog window the file that contains the desired settings from the list box
or enter its name in the entry field File name.
Confirm your selection with the button OPEN. The selected configura-
tion settings will then be loaded into the DVS software. After this the
new settings will be applied, for example, every time a new project is
initialized. Additionally, in the Configuration Tool you have the possibil-
ity at hand to transfer the default settings to the project related settings,
and thus to enable them for your currently active project.
9.5.5 Save defaults…
Different tasks may ask for different settings: With the menu option
Save defaults... you can save the current default and system settings
to an extra file. Thus, you can build up a library of different configura-
tion settings and use them in the future again for different purposes
without configuring the whole system anew. Furthermore, in the Con-
figuration Tool you have the possibility at hand to transfer the default
settings to the project related settings, and thus to enable them for your
currently active project.
The selection of the menu option Save defaults… opens the standard
dialog window to save a file. There you have to specify the storage path
and file name to save the current default and system settings. As soon
as your entries are confirmed with the button SAVE, they will be saved
to an extra file.
After that you can load the contents of this file again into the DVS soft-
ware (see section “Load defaults…” on page 9-25) which will change,
for example, the default settings for each initialized new project as well
as the system settings. However, some changes to the system settings
will be in effect only after a restart of the software.
File extension: *.cf Configuration file
Some changes to the settings will be in effect after a restart of
the software only.
Further information about the Configuration Tool and its set-
tings can be found in the “CLIPSTER Configurations” user
guide.
File extension: *.cf Configuration file
Further information about the Configuration Tool and its set-
tings can be found in the “CLIPSTER Configurations” user
guide.