User guide

8-52
CLIPSTER Edit Tool User Guide
Figure 8-35: Transferring data
Use the settings items as detailed in the following to configure the copy
process:
RT-path for data Specify in this entry field the path on your main
storage where to save the copied data or use
the button to the right of the field ( ) to select
one directly via the opening dialog window.
Reproduce file
structure
When this check box is activated, the directory
structure as found on the foreign system will be
recreated on your storage as well, i.e. the com-
plete path to the clip on the foreign system will
be created in the specified target directory (RT-
path for data). If deactivated, only the main
directory of the clip with the clip stored be-
neath it will be created.
Add heads tails With this check box activated, you can deter-
mine the amount of heads and tails that should
be copied in addition to the material pointed to
by the source in- and outpoint. Afterwards the
transferred clip will provide the entered handles
on either side of the clip or, if not enough ma-
terial is available, the maximum amount that is
possible. Enter the number of heads and tails in
the entry field to the right either in frames or
timecode notation (can be switched with the
combo box to the left).