User guide

8-43
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
one so that the relation of width to height of the last confirmed size re-
mains the same.
Once everything is set close the window and confirm your view settings
with the button OK. Your adjustments to the view settings can then be
seen in the tables of the work area.
Text / Image
This combo box switches the view of the table displayed in the work
area between the normal text-only view and a view together with
thumbnails. When Text is selected, the table is displayed with text in-
formation only. If Image is selected, there will be an additional column
available showing you the thumbnails of the EDL clips’/reels’ first im-
age.
Timecode / Frames
This combo box performs the same operation as the context menu on
a position/length indicator in the DVS software. For further information
about this see section “About Timecode / Frame Number Fields” on
page 2-17.
Select…
With this button you can select (mark) entries in the table of the dis-
played tab. It may be useful, for example, in case a lot of elements are
displayed in the table and a selection would otherwise be tedious to
make. It opens a window as the following:
Figure 8-27: Making a selection
With the combo box to the left determine the search criteria that should
be used to make the selection. There will be different criteria to choose
from depending on the tab displayed in the work area. When a criteria
is selected, you can specify the parameter on which to make the selec-
tion with the combo box to the right.
The button + ( ) to the left adds another set of search criteria items
that will also be used to make the selection. With them an AND search
is provided (e.g. when searching for clips of a particular reel (Clips of