User guide

8-33
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
Original This clip does not belong to an
EDL. It is a normal clip avail-
able in one of the standard
folders of the bin.
Reel name Details the name of the reel that this clip be-
longs to as it was determined during the import
of the EDL. It can be altered freely. If you enter
a new, not existing reel name, the reel count on
the tab EDL increases and you will receive a
new reel on the tab EDL Reels as well as in the
bin. Please note that in some EDL standards the
reel name is restricted, for example, to a maxi-
mum number of characters.
Essence type (A/V) Shows the type of the event, i.e. audio (A) or
video (V). Additional numbers for audio indi-
cate the audio stream that is connected to this
event.
Transition type (TT) Indicates the transition type that precedes this
event, e.g. cut (C), dissolve (D) or wipe
(W<SMPTE no. of transition>, see also section
“Properties of a Transition” on page 7-7).
Source IN
Source OUT
These entries specify the source in- and out-
point of the event either in timecode or in
frames, depending on the selected notation for
the Edit Tool (see section “About Timecode /
Frame Number Fields” on page 2-17). They can
be changed either by entering an in-/outpoint
manually or by using the button SLIP SOURCE
TC (see section “Slip source TC…” on
page 8-47). When changing one of the values,
the remaining value will be set accordingly, i.e.
the duration will not be changed. Altered values
will be displayed in orange.
Head & Tail Shows the amount of head and tail available for
an already conformed clip. The values are in
frames.
Column Description