User guide

8-31
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
8.5.5 The Tab ’EDL Clips’
The tab EDL Clips shows all clips (events) of the currently selected
EDL. It provides information, for example, about their names, statuses
and source in- and outpoints.
Figure 8-19: The tab ’EDL Clips’
By selecting one or more clips in this view of the EDL its representa-
tion(s) in the timeline area will be selected as well. This works also the
other way around.
To select more than one element in this view on the EDL you can use
the usual methods provided by the DVS software (see section “Key-
board Shortcuts” on page A-7) or the functionality of the SELECT…
button (see section “Select…” on page 8-43). Additionally, to select
several adjoining elements you can select one with the mouse, keep the
mouse button pressed and then move the mouse to the point where
the selection should end. All adjoining elements will be selected.
Found clips Indicates how many clips of the EDL are already
linked to data on a storage.
Duration Details the duration of the EDL, i.e. its length.
When working on an EDL in this tab, for example, with the
controls of the conforming mode, all tasks are performed on
the selected EDL only. In case you want to work on several
EDLs at once you have to combine them (see section “Com-
bine…” on page 8-45).
Column Description