User guide

8-27
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
8.5 Conforming Mode – The Work Area
Once at least one EDL is available in the bin (see section “Importing and
Adding EDLs” on page 8-6), it can be displayed in the work area:
Figure 8-15: The work area with the tab ’EDLs’ activated
Besides status information at the top right (i.e. the name of the current-
ly selected EDL and its frame rate), the work area provides several tabs
that offer different views on the imported EDL(s) for further processing:
This section explains the features and tables provided by the work area.
8.5.1 Viewing EDLs
To display a certain EDL on the tabs of the work area you can choose
between different possibilities. You can select the EDL that should be
shown…
– from the bin directly,
– from the table entries provided on the tab EDLs (see section
“The Tab ’EDLs’” on page 8-29) or
EDLs Displays all EDLs imported in the current project.
See section “The Tab ’EDLs’” on page 8-29.
EDL Clips Displays all clips (events) of the currently selected
EDL. See section “The Tab ’EDL Clips’” on
page 8-31.
EDL Reels Displays all reels of the selected EDL. See section
“The Tab ’EDL Reels’” on page 8-36.
Original EDL Displays the EDL in its original form, i.e. as it would
appear in a text editor. See section “The Tab ’Orig-
inal EDL’” on page 8-38.
tabs