User guide

8-23
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
Figure 8-12: Conforming functions provided in the timeline
Select This menu option opens a further submenu
where you can choose between different
methods to select clips on the timeline. For ex-
ample, the option All "online RT" clips se-
lects all clips on the timeline that have the
status ’Online RT’ (for further statuses as well
as explanations of them see section “The Tab
’EDL Clips’” on page 8-31).
Autoconform… Performs the same operation as the button AU-
TOCONFORM… of the conforming mode. See
section “Autoconform…” on page 8-49.
Resolve "Multiple
found"-clip…
If not already visible, this menu option switches
to the conforming mode of the control area
and displays in the preview area the clips that
were found for this EDL entry. Then you can
assign one of the found clips to this EDL entry
and thus resolve its state. See section “Resolv-
ing Multiple Found” on page 8-67 for further
information.
Transfer data… Starts the process to transfer data from a non-
real-time capable storage (e.g. on a remote
system) to the main storage of the DVS system.
See section “Transfer data…” on page 8-51.
Capture data… Starts the process to capture data. See section
“Capture data…” on page 8-53.
Set status to
offline
This menu option opens a further submenu
where you can select the range of clips that
should be set to the status ’Offline’ (see section
“The Tab ’EDL Clips’” on page 8-31), i.e.
whether only the currently selected clip(s) or all
should be set to offline. See also section “Set
status to offline” on page 8-47.