User guide

8-8
CLIPSTER Edit Tool User Guide
Extension Cut lists only: Determines how to interpret the
reference numbers of the keycode information
in the files’ headers on the storage, i.e. whether
they should be interpreted as frames or perfo-
rations. By default the keycode reference num-
bers of cut lists are interpreted as frames by the
DVS software.
Convert to frame
rate
With this combo box you can convert the
frame rate set with Current frame rate to an-
other frequency. It recalculates the in- and out-
points and the durations will be adjusted (see
also Keep the clip duration constant). Select
from its drop-down list the frequency that the
added list should be converted to.
TC drop frame Same as TC drop frame above.
Keep the clip
duration constant
This setting will be observed during a frame
rate conversion. With it the in- and outpoints of
the clips in the list are recalculated, keeping the
events’ durations constant.
Useasclipname Specifies what should be used as the names of
the EDL events. It allows you, for example, to
select comments as clip names or the name of
the EDL/reels in combination with a number-
ing.
Useasreelname Cut lists only: Sets what should be used as the
reel name (e.g. lab or cam roll).
Source TC will be Configures what will be used as the source in-
and outpoints. With this you can select, for ex-
ample, that the destination in- and outpoints
should be used as the source in- and outpoints.
Use comment
entry as
EDLs only: When activated, this setting allows
you to use comment entries in the EDL as reel
names or as the path for an online-conforming.
The first comment entries of the events will be
interpreted accordingly.
Apply to all In case you have added several EDLs to the bin
in a single step (e.g. via drag-and-drop of more
than one EDL from a file manager to the bin),
each will usually invoke a setup window. When
activating this check box, the currently speci-
fied settings will be applied to all EDLs, i.e. you
have to set them only once.
Item Description