User guide

8-7
The Conforming Tool
2
1
3
4
5
6
7
8
I
A
9
Figure 8-1: Example dialog window to configure an EDL
It provides the settings items as described below:
Depending on the type of EDL added, the configuration win-
dow may provide different settings items. The descriptions be-
low detail all items that can be available even if not present in
the figure above.
Item Description
Name This field determines the name of the EDL as it
will appear in the bin. It can be altered freely.
Current frame rate Sets the frame rate of the EDL, i.e. the video
raster’s frequency that was used during the
creation of the list. If not already set correctly,
select the matching frame rate from the drop-
down list of the combo box.
TC drop frame Sets whether drop-frame timecode should be
applied to the frequency indicated in the com-
bo box to the left. Further information about
drop-frame timecode can be found in the
“CLIPSTER Configurations” user guide.
Gauge Cut lists only: Allows you to set the type of film
as well as its perforation. Select the matching
type from the drop-down list of the combo
box.