User guide

7-58
CLIPSTER Edit Tool User Guide
The items of the Even/Odd area are used to determine the starting
field for the calculated result:
With the sliders below the previous settings can be refined:
Motion_Adaptive This mode will yield good results when your clip
contains moving objects because motion in the
clip’s images is detected automatically. A line in-
terpolation will be applied only when interlacing
effects are found. This mode provides best qual-
ity and does not lose general resolution as only
in fast moving parts an interpolation is applied.
Even The even numbered lines (starting with line 0)
are used as the starting field for the application
of a deinterlacing. All odd numbered lines re-
main unaltered.
Odd The odd numbered lines (starting with line 1)
are used as the starting field for the application
of a deinterlacing. All even numbered lines re-
main unaltered.
DeInterlace
threshold
This slider sets the deinterlacing threshold for
the selected modes. It is used to detect whether
interlacing is present in the images. Decrease
this parameter in case moving objects in your
prerendered result still contain some interlacing
effects. The lower the value the more pixels are
deinterlaced.
Motion threshold This slider sets the motion threshold for the se-
lected methods. It is used to detect regions with
moving objects in an image. By decreasing this
parameter you apply the deinterlacing to a larg-
er area in the images. Use it in case interlacing
effects are still visible in your prerendered re-
sults.