User guide

7-51
Timeline Element Properties
2
1
3
4
5
6
7
8
9
I
A
7.12 Picture Masks
For effects there may be picture masks available. They allow the usage
of an effect on a selectable part of a clip only. The part of the images
that will be affected can be set with freely definable shapes (masks).
Once selected for the respective effect, you will receive another settings
pane in the area of the timeline element properties:
Figure 7-46: Picture masks settings pane
With the items available in this settings pane the picture masks can be
set. To the left a list of shapes can be found which can be used, for ex-
ample, to define the shapes. To the right some settings items are locat-
ed available for a configuration of the shapes.
7.12.1 The Shapes List
From the Shapes list to the left choose one of the available shapes for
a picture mask. Once the procedure to configure a shape is completed,
it will hold your data of the set shape. Up to ten different shapes can
be defined.
This feature is available for a secondary color correction (see
section “The Operator ’2nd Color Correction’” on page 7-38).
For a description how to activate it, please refer to the section
of the above mentioned effect.