User guide

7-50
CLIPSTER Edit Tool User Guide
The outer ring of the color wheel displays the color vector that you have
set with the color mask items to the left. It can be selected with the
mouse and turned around the color circle, thereby causing a hue shift
(the hue slider to the right will change accordingly). With this any shift
of the color vector towards another color can be seen at once in the
wheel: It is the color that the color vector in the outer ring is positioned
above.
In addition to the above said, the color wheel can be used the same way
as the color wheel of the primary color correction, but will affect the se-
lected color vector only instead of all colors in the image. So for further
information about its usage see section “Color Wheel” on page 7-36.
Additional Controls
The additional controls of the color correction and balance area are lo-
cated to the right of the color wheel and below it. Most of them provide
the controls for a color correction. With them you can alter, for exam-
ple, the hue of the chosen color vector or other properties, such as
brightness or saturation.
Because the controls, i.e. the sliders to the right of the color wheel, pro-
vide the same features as the ones of the primary color correction, a de-
scription of them can be found in section “The Operator ’1st Color
Correction’” on page 7-31. Nevertheless, when using these controls,
only the selected color vector will be affected.
The button RESET sets all controls and the color wheel of the color cor-
rection and balance area back to their default values and states.