User guide

7-34
CLIPSTER Edit Tool User Guide
With the Chroma items you can adjust color related settings, such as
the hue:
7.10.3 Global
The Global items provide you with sliders for each color value (R, G
and B) as well as a master slider to adjust them all at once.
Figure 7-30: The global color settings
Use the sliders R, G or B to step up or down the color values of the im-
age for the respective color component (red, green or blue). With the
master slider RGB to the left you can set the settings for all three color
components at once, even after already adjusting individual color com-
ponents.
Low Adjusts the darker parts of the clip, i.e. the lift or black
point. By using this setting only the luminance chang-
es, the chroma settings remain as they were. Values
range from -100 to +100.
Hue The hue setting moves the colors of the images
around the color wheel in the HSL color space
(±180°). It is recommended to use this setting lightly
for small corrections only: Adjustments greater than
±10 usually produce dramatic color changes.
Saturation A color’s saturation is its intensity. A higher saturation
will make the color to appear richer, while a lower sat-
uration makes it look paler, or in other words the sat-
uration is the proportion of grey in relation to the
color’s hue. This setting can be set between -100
(grey) and +100 (full saturation).