User guide

7-5
Timeline Element Properties
2
1
3
4
5
6
7
8
9
I
A
7.3 Changing Values of Sliders and Entry Fields
Almost all operators provide sliders as well as entry fields to adjust their
effects. You can adjust their values and settings in several ways:
1. Select a slider with the mouse and move it to the left or right (up
or down) to the desired settings.
2. Use the [Up Arrow]/[Down Arrow] keys after the selection of one
of the settings by clicking in its entry field to step the value up or
down.
3. Use the scroll wheel of your mouse after positioning the mouse
cursor over a slider to step up or down the value.
4. Enter in an entry field the desired setting and then press [Enter] on
your keyboard.
5. Place the mouse cursor over an entry field and use the scroll wheel
of your mouse to step up or down the value.
In most of the above mentioned cases you can in- or decrease the step-
ping value that will be used for the adjustments by pressing the [Ctrl]
key to increase or the [Shift] key to decrease the stepping value. Fur-
thermore, with a double-click of the mouse on a slider field you can on
most sliders reset its setting to its default value.