User guide

6-93
The Timeline
2
1
3
4
7
6
5
8
9
I
A
y Use the Numbering options to configure a file numbering for the
image files to be created:
A preview of the file name can be seen below the items to set a num-
bering. For example, when as a file name prefix scene is entered and
as the file extension _<Date>_<Video format>_<Color
space>_ is specified with a 5-digit numbering, you may receive an
output like the following:
y Once the file names are set as desired click the OK button.
File number will
be
Select from this combo box what should be
used to create the file numbers. You can se-
lect between a consecutive numbering of
frames or the timeline timecode of the Edit
Tool’s timeline. When using the latter the
Edit Tool’s timeline timecode will be recalcu-
lated in frames with the frame rate set for
the finalizing. This value is then used for the
numbering.
Start index/time-
code
When Frame number is selected in the
combo box above, you can enter in this field
the starting point for the numbering, i.e.
with it you can offset the frame number in
the file names of the image files. It can be
entered either in frames or timecode nota-
tion depending on the selected notation for
the Edit Tool (see section “About
Timecode / Frame Number Fields” on
page 2-17).
Minimum number
of digits
With these radio buttons you can determine
the minimum amount of digits that the
numbering should provide. Either you let the
DVS software decide how many digits the
file numbering should provide (auto) or you
set it manually with the entry field to the
right. However, smaller values than the min-
imum number of digits required for the cur-
rently set finalizing cannot be set.
scene_20090101_1080p24_RGB_00001.dpx
scene_20090101_1080p24_RGB_00000.dpx
scene_20090101_1080p24_RGB_00002.dpx
scene_20090101_1080p24_RGB_00003.dpx
...