User guide

6-83
The Timeline
2
1
3
4
7
6
5
8
9
I
A
dio output (see section “Configuring Audio” on page 6-86). By turn-
ing on either one of these only the activated output will be created.
Figure 6-71: Configuring video
To the right of the check box Video output you can find the Hardware
finalize support check box. With it you activate or deactivate the sup-
port of the DVS PCI video board during finalizing. When activated and
if possible, the video files will be rendered in hardware in a render speed
faster than real time (depends on the applied operators and video for-
mats involved). All real-time effects are supported. When deactivated,
the finalizing will be made in software.
With the File format combo box select the file format for your clip to
be generated. For a list of the supported file formats see section “Sup-
ported File Formats” on page A-9. To the right of the File format com-
bo box you can find the button O
PTIONS which provides, depending on
the selected format, further configurations for the files to be generated.
If a container format is selected as the file format (e.g. Win-
dows Media), you cannot generate audio and video sepa-
rately. Both will automatically be included in the created file.