User guide

6-21
The Timeline
2
1
3
4
7
6
5
8
9
I
A
Once at least one profile is available in the list box, you can enable it for
the Edit Tool. For this the desired profile name has to be selected from
the list box and your selection has to be confirmed with the OK button.
The button CANCEL it will close the window for the 3D LUT manage-
ment without confirming any of the alterations.
Nevertheless, the selected 3D LUT profile and file will be in effect for
the timeline only if the check box Video-3D LUT is activated which is
available in the Options area of the ’Timeline output settings’ win-
dow.
Figure 6-19: Activation of the 3D LUT profile
Then the selected profile and its 3D LUT file will be applied to the ma-
terial in the timeline of the Edit Tool.
6.2.9 Cropping the Timeline
Via the SETTINGS… button you can crop the contents
of the timeline, for example, if you need black bars in
the video output. The button is located at the top left side of the time-
line area and after pressing it the ’Timeline output settings’ window
is displayed on the screen.
– By pressing the left mouse button and mov-
ing the mouse you can rotate the color
cube.
– By clicking with the scroll wheel or the right
mouse button you can switch the output
colors to the input colors and vice versa. The
one currently displayed will be indicated at
the top of the preview area.
– By turning the scroll wheel of the mouse
you can morph the colors in the cube from
output to input and vice versa. The degree
of the morphing will be indicated at the top
of the preview area.