User guide

6-19
The Timeline
2
1
3
4
7
6
5
8
9
I
A
create a profile for it. Afterwards the loaded 3D LUT file has to be en-
abled for the DVS software.
Via the SETTINGS… button you can access the items to
load a 3D LUT file into the Edit Tool. It is located at the
top left side of the timeline area. After pressing this button the ’Time-
line output settings’ window is displayed.
At the bottom of this window you can find the Options area where
further optional settings are provided. To the right you can find the set-
tings items to load a 3D LUT file:
Figure 6-17: Items to load a 3D LUT file
After clicking on the button 3D LUT… a window opens to load a
3D LUT file and create a profile for it:
Figure 6-18: 3D LUT file management
The 3D LUT support of the DVS software is an optional fea-
ture. Depending on the configuration of your DVS system it
may not be available.
The other items available in the Options area are explained in
their respective sections (see section “Changing the Layout of
the Timeline Area” on page 6-6, section “Further Audio Con-
figurations” on page 6-17, section “Cropping the Timeline” on
page 6-21, and section “Burn-in Information at the Output(s)”
on page 6-25).
3D LUT
management