User guide

6-18
CLIPSTER Edit Tool User Guide
Figure 6-15: Items for a further configuration of audio
In detail this area provides the following items:
Once everything is set as desired, the audio configuration is complete
and you can monitor the audio output as configured via the analog and
digital audio outputs of the DVS system.
6.2.8 Loading and Applying a 3D LUT File
With a three-dimensional look-up table (3D LUT) file you can, for ex-
ample, simulate the typical look of a projected motion picture film on a
monitor connected to the digital video interfaces of the DVS system.
The Edit Tool supports 3D look-up tables from various suppliers, such
as ARRI or Kodak. To apply a 3D LUT you have to load its file first and
Audio
Scrubbing
If this check box is activated, the contents of the
audio tracks will be given out during a scrubbing of
the Edit Tool’s timeline, for example, when making
a fast shuttle operation with the mouse. Then the
audio signal resembles and imitates a fast shuttle
operation of a VTR.
M
ONITORING… The button MONITORING… configures the analog
audio outputs of the DVS system. A click on this
button opens the following window:
Figure 6-16: Analog audio configuration
The settings Output A and Output B configure
the first and second analog monitoring output of
the DVS system respectively. Select from the com-
bo boxes the audio channels that should be given
out at the respective analog output.
audio
configuration