User guide

6-16
CLIPSTER Edit Tool User Guide
ingly. With the check box Copy to all tracks the adjusted offset can
be transferred to all other available audio tracks easily: Simply enable
the check box and confirm your setting with the OK button to copy the
synchronization settings to all audio tracks.
In the area Output Path(s) you can see the different digital audio
channels that the DVS system provides. With a click on the respective
button select the digital audio channel(s) that should be used for the
output. An activated + button between two channels configures the
two channels to stereo.
With the settings of the area Audio Mode and the ones of the area
Output Path(s) you can mix the audio signals of your project accord-
ing to your needs:
– If the audio clip in the timeline is in mono, it does not matter
whether the audio track is set to stereo or mono. The output on all
selected channels will be the same, i.e. the mono audio clip as it is
available in the timeline.
– If the audio clip in the timeline is in stereo and the audio track is
configured to mono, the clip will be downmixed by the Edit Tool.
On all selected channels you will receive the same signal.
– If the audio clip in the timeline is in stereo and the audio track is
configured to stereo, the output will depend on the state of the
+ button, i.e. whether the channels are configured as stereo or
mono channels: When the channels are set to mono, a mono signal
Audio Clip Audio Track Output
Mono Mono Mono of clip
Mono Stereo Mono of clip
If the audio clip is in mono, the settings for the track’s audio
mode and the channel’s + button provide, of course, no
function regardless of their setting.
Audio Clip Audio Track
Output
Channel A Channel B
Stereo Mono Mono of stereo
clip
Mono of stereo
clip