User guide

6-13

The Timeline

Figure 6-12: Window to set the output settings

As a standard after selecting the video format settings the SDI output

configurations are displayed. Use the provided items to set the video

format accordingly. In this window you can also set the software to an

autoscaling of the material to be played out if its original resolution dif-

fers from the configured output raster. Additionally, you can determine

here the amount of audio channels that will be embedded in the video

signal (AIV). This is provided because some external devices have diffi-

culties when handling embedded audio that provides more than four

audio channels.

With the tabs at the very top you can set the output format for the dif-

ferent ports. The output video format can be set separately for the SDI

and the DVI/analog outputs. The settings items of the tab DVI/Analog

will be available once the check box Lock to Output is deactivated.