User guide

6-12
CLIPSTER Edit Tool User Guide
6.2.6 Configuring the Video and Audio Output
To output video and audio and to view your project’s timeline with a
monitor connected to the DVS system, you have to configure the out-
put format of the timeline accordingly. Both, the video and audio out-
put, can be configured freely.
How to Configure the Video Output
With the button SETTINGS… at the top left side of the
timeline area you can determine the output format
(video raster) of the project. Additionally you can find here various oth-
er settings concerned with the timeline or its output.
In the Edit Tool you can set different video format settings either for the
SDI or the DVI and analog outputs. Once set, the respective format(s)
will be automatically applied to the output ports of the DVS system. By
default the DVI/analog output settings are linked to the video output
format of the SDI and, if not configured otherwise, will be set to the
same raster.
After pressing the button SETTINGS… the following window will be dis-
played on the screen:
The selected SDI output raster is applied to the video overlay
and it may have an effect on the images displayed there (e.g.
they may get cropped). You can use the video overlay to see
the effects immediately because it will always show the exact
content of the outgoing signal.