User guide

6-7
The Timeline
2
1
3
4
7
6
5
8
9
I
A
Video and Audio Track Properties
Via the SETTINGS… button you can alter the size and
number of video and audio tracks. It is located at the
top left side of the timeline area. After pressing this button the ’Time-
line output settings’ window is displayed.
At the bottom of this window you can find in the Options area further
optional settings. To the left you can find settings to alter the size and
number of the video and audio tracks in the timeline:
Figure 6-5: Track size options
With the fields for the track sizes you can adjust the height of the tracks
for video and audio separately. Either change the sizes by selecting one
of the preset sizes from the combo boxes to the left (Small, Medium,
Large) or enter the pixel height manually in the adjoining entry fields.
Additionally, you can find here to the right entry fields where you can
set the amount of audio and video tracks that will be visible in the time-
line area.
The other items available in the Options area are explained in
their respective sections (see section “Further Audio Configu-
rations” on page 6-17, section “Loading and Applying a
3D LUT File” on page 6-18, section “Cropping the Timeline”
on page 6-21, and section “Burn-in Information at the Out-
put(s)” on page 6-25).
Individual track sizes can also be configured for each track in
the timeline area manually (see section “Changing Track Sizes
Manually” on page 6-8).
Working with several video tracks vertically in the timeline is
different from the usual approach of a horizontal editing in a
timeline. Then the different tracks of the timeline form a stack.
Further information about this and how to work with vertical
editing can be found in section “Vertical Editing of Video Clips
in the Timeline” on page 6-67.
Further information about the ’Timeline output settings’
window can be found in section “How to Configure the Video
Output” on page 6-12.