User guide

5-18
CLIPSTER Edit Tool User Guide
5.4.2 Setting In- and Outpoint for the Clip from the Bin
When the video or audio clip from the bin (bin clip) was dragged to the
control area and the source-edit mode is activated, you can set the in-
and outpoint of the clip frame accurately. For this you have to use the
scrub bar and the position items:
Figure 5-14: Bin clip in source-edit mode
The scrub bar provides a timeline of the clip coming from the bin. You
can use it and the position items to adjust the in- and outpoint of the
bin clip. In detail you can find the following elements:
The entry fields are connected to the selected display type of
the Edit Tool’s timeline. For example, if source timecode is se-
lected as the display type and such a timecode is provided by
the clip, the bin clip’s entry fields will provide the source time-
code instead of a relative timeline timecode (see section
“Changing the Display Type” on page 6-10).
Audio clips provide the same trim possibilities as video clips.
However, with the timecode notation for the entry fields acti-
vated, the audio values will be shown as seconds with a deci-
mal number, i.e. with milliseconds; when the frame notation is
activated, the values will be displayed in milliseconds only; and
when the file number viewing is activated, the values indicate
individual samples.
scrub bar
position items