User guide

5-13

The Control Area

If you activate a play action of the clip

from the bin in the source-edit mode (see

section “The Source-Edit Mode” on

page 5-14), a play-out of the timeline will

be terminated.

You can jump to particular points on the timeline,

such as cutting/edit points and timeline markers,

with these buttons. The first button jumps to the

point that is previously located on the timeline

while the second button jumps to the next one. Al-

ternatively, you may use the keyboard shortcuts [A]

and [S].

This button plays around the current position of the

timeline cursor (± several sec.) in a loop. To deacti-

vate the loop review press the button REVIEW

again. The duration of the review can be configured

freely with the with the Configuration Tool (see

“CLIPSTER Configurations” user guide for more in-

formation).

This field shows the current position of the timeline

cursor in timecode or frames notation. If you want

to move to a certain position on the timeline, you

can enter the position in the appropriate format

here. After that press [Enter] and the cursor will

then move to the entered position. For more infor-

mation about the timecode/frame number fields

and their format see section “About Timecode /

Frame Number Fields” on page 2-17.