Specifications

5-8
Using the DCP and Self KDM
This will open the dialog window to open a file (same as in figure 5-4
on page 5-4).
y In this window select the self KDM generated for the DCP from
which the track file should be used and confirm your selection with
the button OPEN.
This will load the keys of the self KDM into the CLIPSTER DCI Master-
ing system.
y Afterwards add the wanted track file (video or audio) to the bin
either by using a file manager or the menu option Add clip of the
bin’s context menu.
This will make the encrypted track file available in CLIPSTER and you
can use it in your project.
You can also work the other way around: First load the en-
crypted track file and then the self KDM.
KDM keys are not stored in a project file. Once the project is
closed and opened again at a later time, you have to load the
respective self KDM again to access the material of the en-
crypted track file.
Currently encrypted material provides no thumbnails or wave-
forms in CLIPSTER. However, the decrypted video can be seen
in the overlay of the Edit Tool.