Specifications

5-4
Using the DCP and Self KDM
This checks the CPL whether the content of the DCP is encrypted. If this
is the case, another dialog window to open a file will be displayed on
the screen:
Figure 5-4: Loading of the self KDM
y In this window select the created self KDM
(KDM_self_<ID>.xml) and confirm your selection with the but-
ton OPEN.
Then the content of the DCP will be loaded in the CLIPSTER Edit Tool
and you will see it in the timeline. Afterwards you can use the DCP, for
example, to play out the timeline and review the content of the DCP to
check its correctness.
5.3 Creating Additional KDMs
With an already encrypted DCP and a self KDM you are able to create
further KDMs, for example, for later releases of the same material with-
out having to generate the DCP again. For this perform the following:
Currently encrypted material provides no thumbnails or wave-
forms in CLIPSTER. However, the decrypted video can be seen
in the overlay of the Edit Tool.
A loaded CPL is no project file of CLIPSTER. Therefore, certain
settings may not be configured correctly and you may have to
set them again. Additionally, a loaded CPL should not be saved
as a CLIPSTER project file.