Specifications

4-6
Creating the DCP
Figure 4-4: Options to configure a variable file naming
In the opening window you can set the variable naming options:
y Enter a file name prefix in the entry field File name.
y With the File name extensions check box activated, add variable
or static components to the file name:
– A variable/separator can be selected from the list of the lower
combo box. Then it can be added to the upper combo box at
the current cursor position with the ADD button.
– By double-clicking (marking) variables/separators in the upper
combo box they can be deleted or modified using the respec-
tive buttons (for deletion, even without marking, you may also
use the respective keys on the keyboard).
– The variable Customized adds a user-defined string to the
extension at a selectable position. With Customized selected
the configurable string can be entered in field of the lower
combo box and then be transferred to the upper one with the
button ADD.
A preview of the file name can be seen below the items to set a file
name extension.
y When the file name is set as desired click the OK button.
This will close the window to configure a variable naming and you will
be returned to the finalize dialog.
y In the finalize dialog make sure that the check box in front of the
NAME OPTIONS… button is activated, otherwise they will not be
applied.
Then the chosen file naming will be detailed in the finalize dialog ac-
cordingly (entry field File name). As long as the variable naming is ac-