User manual

EVS Broadcast Equipment S.A.
Issue 2.6.B November 2013
32 SDI Board Installation Procedure
5. A new tab is now available named Card 0. If not, there may be an issue with the DVS
SDI card hardware installation.
6.2 Install the Card License
6.2.1 Blackmagic
The Blackmagic SDI board does not require any licenses.
6.2.2 DVS
The DVS board may have the license pre-installed.
To check the license, proceed as follows:
1. Use the Setup menu button.
2. Select “Info License”.
a) If the status area displays license information, then the license is already
installed:
b) If not, you have to install the license.