User manual

EVS Broadcast Equipment S.A.
Issue 2.6.B November 2013
12 OpenCube XFReader User Interface
Control
Description
Loop from start when playback reaches end.
Switch output playback mode.
Note
The speeds of fast rewind and fast forward commands can be configured
(see 4 - Configuring OpenCube XFReader).
3.4 Subclip Area
This area allows you to extract a subclip from the loaded file.
Control
Description
Establishes the IN point of the subclip. Playback will
use TC IN as the new starting point.
Establishes the OUT point of the subclip. Playback will
use TC OUT as the new end point.
Resets the TC IN and TC OUT to the loaded file value.
Starts the creation of the subclip. If you click on SAVE,
the created subclip can be opened in the current
window.
Note
Subclip creation is not supported for OP-Atom files (except P2), MXF with
external references and GXF files.
Note
Sidecar scc and mcc files are not subclipped.
3.5 Audio Track Area
This area displays the peak and dbFS audio level of each track; it also allows you to
commute track output. Only audio channels present in the source files are active. Audio
channels can be muted or unmuted by simply checking or unchecking the switch. The
application will split a multichannel track to stereo tracks.