User guide

Viz Engine Administrator’s Guide

• HD Interlaced: Specifies if Viz Engine should render frames or fields for interlaced

HD formats (i.e. 1080i). Rendering frames improves the rendered output but has a

higher performance cost. Available options are: Field and Frame.

• Sync. DirectShow: Synchronize DirectShow clip playback with renderer (may

cause video jumps and audio cracks).

• NLE Antialiasing: Antialiasing for small images snapshots and NLE frames.

• Image Load Error: If an image load error occurs you can configure Viz to keep the

old image or clear the image (i.e. not showing anything).

5.20 Scene Default Values

Scene Default Values

This section configures the default values for new scenes.

• Key: Sets the key mode. Alternatives are; Virtual Set, Full Screen, Overlay, and Auto

Key.

• Animation Motion Path: Sets the default setting for all new position key frames.

When set to Smooth all handles in the scene output enables a smooth motion path.

When set to Linear no handles are available; hence the motion path is not smooth.

This setting corresponds with the Path Control setting in the Key frame editor. When

set to manual handles are made available in the spline view that enables speed

to be manually handled between key frames. When set to Linear no handles are

available.

• Animation Motion Speed: Sets the default setting for all new position key frames.

• Flicker Filter: When enabled it will reduce interlaced flicker on high contrast

objects. For example small lines and hard objects. Alternatives are; Off, and Level

1-3.

• Gamma: Sets the gamma radiation/emission for textures.