User guide

Viz Engine Administrator’s Guide

• Import by Name: Set to Yes to check for objects by name rather than by UUID. Set

to No to check by UUID.

• Popup Server Messages: Enable or disable popup server messages. Disabled

only works on local host.

• Date Format: Set the date format to EU (DD.MM.YYYY 13:54) or US (MM/DD/YY

01:54).

• Archive Bit-Mode: Set the bit-mode in which the archive will be saved.

Note: For compatibility, 32-bit should be enabled if scenes will be imported to Viz

Artist versions prior to build 2310.

• Allow Folder Move: Allow or restrict the users ability to move/organize projects

and folders in Viz Graphic Hub. Options are Normal, with Shift or No. Default is

Normal which allows the user to freely move projects and folders.

The following prefix settings are needed if you are using an external control application

that sends commands containing certain path locations, but where the path of your

files is a different one on your Viz Graphic Hub (e.g. because you deployed them to a

specific location).

• Prefix Mode: Activate the prefix mode.

• Prefix Converting Info: Show the prefixed (final) paths in the console (this

behaves like the Viz Artist 2.x debug mode).

• Prefix Path: Contains the prefix path string that is used for incoming commands

containing path parameters.

Failover

To add redundant servers to the failover list

1. Enter the host name.

2. Enter the Graphic Hub.

3. Enter the port number.

4. Click Add.