User guide

Viz Engine Administrator’s Guide

Note: Matrox X.mio only supports balanced audio through XLR connectors. X.mio

2 and X.mio 2+ only supports unbalanced audio through BNC connectors.

Dual Channel Configuration

In a dual channel setup AES channels can be configured to use up to 4 channels per Viz

Engine for an X.mio and up to 8 channels per engine for an X.mio2 and X.mio2 Plus.

If 8/16 channels are set for one Viz Engine the other Viz Engine will overwrite these

settings as the maximum of AES channels is 8/16 for X.mio/X.mio2/X.mio2 Plus.

For correct mapping both Viz Engines should be set to an equal number of used AES

channels.

To add new audio channels

1. Click the Add button.

2. Select the new entry from the Configurations list, and enter the new name in the

Name field.

3. Set the Channel Geometry, and the number of Used Channels.

4. Click Save.

To add multi-language audio channels

Multi-language, audio setup

1. Click the Add button.

2. Select the new entry from the Configurations list, and enter the new name in the

Name field.

3. Set the Channel Geometry to Stereo, and then click Reset Aliases.

4. Increase the number of Used Channels to 4

• This will improve the performance.

5. In the Channel 2 field add the alias FrenchLeft.

6. In the Channel 3 field add the alias FrenchRight.

• Add the same configuration for English (EnglishLeft, EnglishRight) and German

(GermanLeft, GermanRight) on the other machines.

7. Click Save.

To add multiple audio channel configurations