User guide

Viz Engine Administrator’s Guide
Copyright © 2014 Vizrt Page 55
3. Select a *.cfg file.
4. Click the Restart... button to load config file.
To save a current configuration profile
1. Start Viz Configuration.
2. Change the configuration as required.
3. Click the Save button to save the configuration.
4. Click the Restart... button to apply the saved changes.
To save a new configuration profile
1. Start Viz Configuration.
2. Change the configuration as required.
3. Click the Save As... button to save the configuration.
To reset the Viz Configuration file
The Reset button will set all configuration settings back to default.
1. Start the Viz Configuration.
2. Click the Reset button.
3. Click Restart... to apply the changes
To restart Viz Configuration
Click the Restart... button to save changes.
1. Click the Restart... button.
2. Select from:
• Current
• Viz Engine w/GUI
• Viz Engine w/o GUI
• Viz Artist
• Viz Config
5.2 Audio Settings
This section contains information on the following topics:
• Audio Properties
• Dual Channel Configuration
• To add new audio channels
• To add multi-language audio channels
• To add multiple audio channel configurations
• To map audio output for a dual channel setup
• To delete audio channels
• To manually activate an audio device