User guide

Viz Engine Administrator’s Guide

1. Start the browser

2. Search for and download:

• The FFDShow MPEG-4 Video Decoder

IMPORTANT! Make sure a license is available to use the codec and that the

32-bit version of the codec is downloaded

• The Matroska Splitter

• The Windows 7 DirectShow Filter Tweaker

3. Uninstall older 64-bit versions of the MPEG-4 codec

4. Extract:

• The Matroska Splitter, and

• THe Windows 7 DirectShow Filter Tweaker.

5. Install the MPEG-4 codec

6. Set your MPEG-4 32-bit decoder to FFDShow (see how To set a preferred

decoder)

7. Register the Matroska Splitter (see how To register the Matroska Splitter)

8. Preview video clips will now be available from Viz One.

To set a preferred decoder

1. Run the Windows 7 DirectShow Filter Tweaker

2. In the appearing dialog box click Preferred decoders

3. Set your MPEG-4/H.264 32-bit decoder to FFDShow.

4. Click Apply & Close.

5. Click Exit.

To register the Matroska Splitter

1. Extract the Matroska Splitter

2. Copy the ax file to your C:\Windows\System32 folder

Note: There are two files available, one in the root folder that is used for 32-

bit systems, and one in the x64 folder used for 64-bit systems.