User guide

Viz Engine Administrator’s Guide

• Check that the license key has not been entered twice.

• Check that the whole string is pasted.

9. Click Apply New License.

10. Restart Viz for the changes to take effect.

To apply a Viz license in Viz Configuration

Use this procedure to apply new license before a license expires.

1. Make sure that the date and time on the computer is correct. The license is only

valid for a certain time frame.

2. Insert the License dongle.

3. Open Viz Configuration.

4. Click on Viz License Information.

5. Check that the Dongle ID, in the License Information text file, is the same as the

System ID in the Viz License Information panel.

6. Check these License details:

• Check that the license string has 32 pairs of characters and that they are

divided by a single space.

• Check the characters and for spaces at the end.

7. Copy the license string from the License Information text file.

8. Paste the license string in the Licence field of the Viz License Information panel.

• Check that the license key has not been entered twice.

• Check that the whole string is pasted.

9. Press <ENTER>.

10. Click Save.

11. Restart Viz for the changes to take effect.

3.5 Integration with Viz One

Viz Engine can be integrated with Viz One so that video clips can be transferred, and

monitored, from and to Viz One.

Two Services must be downloaded and installed so that the Viz Engine can

communicate with Viz One:

• Mediaftp (file transfer), and

• Fsmon (file system monitor)

The following sections describe how to download and install the Transfer and Monitor

services to the Viz Engine and how to enable clip playout.

A Viz One system, which is configured to communicate with the Viz Engine, must be

running during the installation and configuration of the two services.

Administrator rights are required to complete the install (see Prerequisites).