User guide

Viz Engine Administrator’s Guide
Page 36 Copyright © 2014 Vizrt
In a single channel setup where both program and
preview output is on the same machine, the default
preview port is set to 6800 in order to separate the
program and preview channels.
In a dual channel setup, the default program ports
are 6100 and 6800 for channel 1 and channel 2,
respectively.
In a dual channel setup, when used for stereo
production, the default program ports are 6700 and
6800 for channel 1 (left eye) and channel 2 (right eye),
respectively.
Viz Trio 6200
6210
6200 is used for controlling the Viz Trio client over a
socket connection.
6210 is used by the Viz NLE plugin to establish a
connection to Viz Trio.
Newsroom
Component
6220 Used by the Viz NLE Plugin to establish a connection to
Viz Content Pilot’s Newsroom Component.
Viz NLE Editor 6230 Used by the Viz NLE Plugin to establish a connection to
the Viz NLE Editor (on Mac).
Viz NLE Config 6240 Used by the Viz NLE plugin to establish a connection to
the Viz NLE Configuration tool (on Mac).
Ticker Service 6300
6301
Ticker handler in the Media Sequencer connects to port
6300 for feedback from Ticker Service.
Ticker handler in the Media Sequencer connect to
port 6301 when controlling the ticker via a socket
connection.
Viz Content Pilot 6484 Socket connection used for controlling Viz Content Pilot
using macro commands.
Viz Video Hub 6555 Message bus port for communication with Viz Video
Hub (service: Message bus).
Viz Preview
License server
7452 For the Newsroom Component using an unlicensed Viz
Engine for local preview with a connection to the Viz
Preview License server (is not the same as the Preview
Server).
Viz Content Pilot
Data Server
8177 Used when connecting over http using the REST
interface.
Media Sequencer 8580
8594
For clients connecting to the Media Sequencer . 8580 is
specifically used when connecting over http using the
REST interface.
Viz Video Hub 8080 Used for sending keyframes (service: ardok).
Viz Gateway 10001
10002
10540
10541
For DB notification events.
For Viz Gateway controller clients.
For MOS object updates.
For MOS playlist updates.