User guide

Viz Engine Administrator’s Guide

--------------------------------------------------------------------

Page 1

To install a DVS Centaurus II license

1. Locate and double-click the dvsconfig.exe file located in the driver folder

downloaded from Vizrt’s FTP.

2. Select the Card 0 tab.

• When selecting the Card 0 tab for the first time the system will inform that a

license needs to be installed for the product.

3. Click OK to close the DVSConf Warning dialog box.

4. Click the Setup button and select Set License from the appearing drop-down

menu.

5. Enter the license key in field Key 1 and click the Set Key 1 button.

Note: It has been reported that the key might be ignored and that validation fails

although it was correctly entered. Re-enter the license string and try again.