User guide

Viz Engine Administrator’s Guide

Note: A radial-aerator is mandatory as the video board reaches high

temperatures during operation.

Once the machine is powered up you may verify that the Matrox X.mio board has been

correctly installed by looking for the blue OB -light on the (top) backside of the slot

panel. A lit light indicates that the board is correctly supplied with power.

See Also

• NVIDIA Graphics Cards

• BlueFish444

• Digital Video Systems

• Matrox X.mio Series

• Matrox DSX LE Series

• NVIDIA Quadro SDI Capture

20.8 HP xw8200 Installations

This section describes how to setup a HP xw8400 machine with the different cards

provided by Vizrt:

• To setup an HP xw8200

To setup an HP xw8200

PCI , PCIe and PCI-X slots, HP xw8200

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Insert the graphics card in the PCIe slot number 2 from the top.

3. Insert the Matrox video board into the PCI-X slot number 4 from the top.

4. Insert a powerful radial-aerator into the PCI-X slot number 6 from the top.

5. Optional: Insert the Audio-extension Card into the PCI slot number 7 from the top.

Note: A radial-aerator is mandatory as the video board reaches high

temperatures during operation.