User guide

Viz Engine Administrator’s Guide

PCI, PCIe and PCI-X slots, HP xw8600

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Insert the graphics card in the PCIe slot number 2 from the top.

3. Insert the Matrox video board in the PCIe slot number 4 from the top.

4. Insert a powerful radial-aerator in the PCIe slot number 5 from the top.

5. Optional: Insert the Audio-extension Card in the PCI-X slot number 6 from the top.

6. Optional: Insert the extra slot panel for the X.mio2/44 board in any of the vacant

slots, and connect it to the X.mio2 board.

Note: A radial-aerator is mandatory as the video board reaches high

temperatures during operation.

To setup an HP xw8600 with a Matrox board

PCI, PCIe and PCI-X slots, HP xw8600

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Insert the graphics card in the PCIe slot number 2 from the top.

3. Insert the Matrox video board into the PCIe slot number 7 from the top.

4. Insert a powerful radial-aerator into the PCIe slot number 6 from the top.