User guide

Viz Engine Administrator’s Guide

8. Save and exit the BIOS

20.6 HP xw8600 Installations

This section describes how to setup a HP xw8600 machine with the different cards

provided by Vizrt:

• To setup an HP xw8600 with a DVS Centaurus board

• To setup an HP xw8600 with a Matrox board

See Also

• NVIDIA Graphics Cards

• BlueFish444

• Digital Video Systems

• Matrox X.mio Series

• Matrox DSX LE Series

• NVIDIA Quadro SDI Capture

To setup an HP xw8600 with a DVS Centaurus board

PCI-X , PCI and AGP slots, HP xw8600

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Install the graphics card in slot number 2 from the top.

3. Install the video board in slot number 4 from the top.

4. Install the separate SDI/RS-422 panel in slot number 1 from the top.

• Make sure that the cable connections are properly mounted and that it stays

clear of any supplemental aerators or the aerator of the graphics device.

To setup an HP xw8600 with a Matrox board