User guide

Viz Engine Administrator’s Guide

PCI and PCIe slots, HP DL370 G6

IMPORTANT! Before touching any components make sure you use an anti-static

wrist strap to prevent electrostatic discharge.

1. Disconnect the power and all other peripherals.

2. Insert the graphics card in PCIe2 slot number 8 from the left.

3. Insert the video board (i.e. Matrox X.mio2) into the PCIe2 slot number 3 from the

left.

4. If you have a Matrox board, insert the radial-aerator into the PCIe slot number 2

from the left.

• A radial-aerator is mandatory as the video board reaches high temperatures

during operation.

5. Optional: Insert the Audio-extension Card into the PCIe2 slot number 5 from the

left.

6. Optional: Insert the extra slot panel for the X.mio2/44 board in any of the vacant

slots, and connect it to the X.mio2 board.

7. Tidy up all cables and close the computer’s casing.

Note: Matrox DSX.LE cannot be mounted in the DL370 G6

Once the machine is powered up you may verify that the Matrox X.mio board has been

correctly installed by looking for the blue OB -light on the (top) backside of the slot

panel. A lit light indicates that the board is correctly supplied with power.

To setup an HP DL370 G6 with two graphics cards